Updates, System and Support Files
AUTOPOD+ Tx and Rx boxes
On this page you will find how to update your Autopod+ Tx and Rx boxes
This is an easy process we promise!
Note:
Please download and read the latest version of the User Manual (v 3.1) below, which has been written for this firmware
There is no updates for firmware to the AutoPod systems, this is only for Autopod+ and Panapod systems, please select correct system from the below boxes.
You MUST update both of the Tx (Desk) box and Rx (Leg) box together from the firmware's here. Failure to do this will cause the system to not function correctly.
If in the event that your system is not working correctly, please reset the boxes or alternatively reload the firmware as detailed in the PDF’s here.
We are working on new firmware to improve your customer experience, however,
- If you have any requests for a function whilst using the system
- You notice a bug in the updater or whilst using the system
- please contact us at info@polecam.com
| Documents | ||
|---|---|---|
| User Manual (v 3.1) | Download PDF | |
| Updating AutoPod+ Tx Foot Box | Download PDF | |
| Updating Autopod+ Rx Leg Box | Download PDF | |
| Resetting Rx Leg Box to factory setting from Firmware v48 | Download PDF | |
| Firmware Update GUI | ||
|---|---|---|
| Firmware Update Gui v0.3 | Download (zip) | |
| Latest Firmware | ||
|---|---|---|
| Tx Foot Firmware file v2.1 | Download (zip) | |
| Rx Leg Firmware file v2.1 | Download (zip) | |
| Previous Firmware | ||
|---|---|---|
| Tx Foot Firmware file v0.28 | Download (zip) | |
| Rx Leg Firmware file v0.42 | Download (zip) | |
